Home

AOKoda CellMeter8 8S Battery Voltage Capacity Balance Servo Checker Tester With Discharge Module

AOKoda CellMeter8  8S Battery Voltage Capacity Balance Servo Checker Tester With Discharge Module

AOKoda CellMeter8 8S Digital Battery Voltage Capacity Balance Servo Checker Tester With Discharge Module Specification: Type: A: Tester with 3 bulbs B: Tester with 1 bulb - High visibility LCD display screen - Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries - Can be used as Servo tester to test standard and narrow servo. - Port for discharge plug of NiMh/NiCd batteries - Can be used to check the battery voltage of Lithium batteries including Lipo, LiFe, Li-Ion, as well as NiMH and NiCd batteries. - Measure the voltage of both individual cells and full battery voltage, and can also indicate the highest voltage cell, lowest voltage cell and difference Discharge Current: 1A Balance Current: 1A Battery Voltage Test Precision: 0.001V Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery Servo Test Range: 1000-2000us or 500-2500us Package Included: 1x CellMeter8 Battery Voltage Tester 1x External Discharge Module 1x Bulb

Toys/Games/Electronic

AOKoda CellMeter8 8S Battery Voltage Capacity Balance Servo Checker Tester With Discharge Module

AOKoda CellMeter 8 battery checker with Battery Voltage Balance Servo Checker Tester

AOKoda CellMeter 8 battery checker with Battery Voltage Balance Servo Checker Tester

Description Name: AOKoda CellMeter 8 150W Discharge Module+ Battery Voltage Balance Servo Checker Weight: About 83g This discharge set will help to keep your battery in a better state. About the Battery Servo Checker Discharge Current: 1A Balance Current: 1A Battery Voltage Test Precision: 0.001V Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery Servo Test Range: 1000-2000us or 500-2500us Package 1x AOKoda CellMeter 8 150W Discharge Module Set 1x Battery Servo Checker 1x Manual

Toys/Games/Electronic

AOKoda CellMeter 8 battery checker with Battery Voltage Balance Servo Checker Tester

AOK CellMeter 8 Multifunctional Digital Battery Capacity Servo Checker Tester 2S-8S

AOK CellMeter 8 Multifunctional Digital Battery Capacity Servo Checker Tester 2S-8S

AOK CellMeter 8 Multifunctional Digital Power Servo Checker Tester 2S-8S Servo test: ESC test: Description: Brand Name: AOK Item Name: CellMeter 8 Discharge Current: 1A Balance Current: 1A Battery Voltage Test Precision: 0.001V Battery Type: Can test Li-Po/Li-lon/Li-Fe(2-8S),NiCd/NiMH(4-8S) battery Servo Test Range: 1000-2000us or 500-2500us Features: - High visibility LCD display screen - Port for balance plug for up to 8 cell Lipo, LiFe, or Li-Ion batteries - Can be used as Servo tester to test standard and narrow servo. - Port for discharge plug of NiMh/NiCd batteries - Can be used to check the battery voltage of Lithium batteries including Lipo, LiFe, Li-Ion, as well as NiMH and NiCd batteries. - Measure the voltage of both individual cells and full battery voltage, and can also indicate the highest voltage cell, lowest voltage cell and difference English Manual, Click Here Package Included: 1x AOK CellMeter 8 servo tester

Toys/Games/Electronic

AOK CellMeter 8 Multifunctional Digital Battery Capacity Servo Checker Tester 2S-8S

AOKoda CellMeter 8 150W Battery Discharge Module Set for AOKoda Discharger

AOKoda CellMeter 8 150W Battery Discharge Module Set for AOKoda Discharger

Description Name: AOKoda CellMeter 8 150W Discharge Module Weight: About 48g For: AOKoda 5 in 1 Discharger, AOK CellMeter 8 tester, AOK 3 in 1 Balance Discharger Package 1x AOKoda CellMeter 8 150W Discharge Module Set

Toys/Games/Electronic

AOKoda CellMeter 8 150W Battery Discharge Module Set for AOKoda Discharger

AOKoda CellMeter 8 150W Discharge Module Set with Battery Voltage Tester Buzzer

AOKoda CellMeter 8 150W Discharge Module Set with Battery Voltage Tester Buzzer

Description Name: AOKoda CellMeter 8 150W Discharge Module+ Battery Voltage Tester Buzzer Weight: About 63g This discharge set will help to keep your battery in a better state. About the buzzer Use for 1-8s Lipl/Li-ion/LiMn/Li-Fe. Voltage detection pricision: 0.01V. Unit voltage display range: 0.5V-4.5V. Total voltage display range: 0.5V-36V. 1S test mode voltage range: 3.7v-30v. Low voltage alarm mode for 2-8S. Alarm set value range: OFF-2.7V-3.7V. Package 1x AOKoda CellMeter 8 150W Discharge Module Set 1x Battery Voltage Tester

Toys/Games/Electronic

AOKoda CellMeter 8 150W Discharge Module Set with Battery Voltage Tester Buzzer

SKYRC LiPoPal Self Voltage Balancer 2-6S LiPo For Battery Voltage Checker

SKYRC LiPoPal Self Voltage Balancer 2-6S LiPo For Battery Voltage Checker

SKYRC LiPoPal Self Voltage Balancer 2-6S LiPo For Battery Voltage Checker Specification: Applicable Battery Pack: 2-6S LiPo Voltage Display Tolerance: +/-1.5% Voltage Display Resolution: 0.01v Voltage Display Range: 0-5v Balancing Current: 50mA Operating Temperature: 10~+45C Storage Temperature: -20~+60C Case Size: 70x38x11mm Weight: 23g Description: SKYRC LiPoPal is a simply used battery checker and self voltage balancer. When we are flying or running outside, it is difficult to know the remaining capacity of the battery. With this tiny LiPoPal we could check the voltage of each cell and the remaining capacity in percentage at anytime and anywhere. As we know, if each cell of the battery pack is balanced, the battery performance will be much better and the cycle life will be longer. But sometimes, we may don't have time or tool to balance the battery cell. With this small kit, when it detects the pack is not balanced, it will start work to balance the pack cell at once. Function: There are two functions of this compact device: 1.Battery Checker The LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage %. 2.Self Voltage Balancer This program can equalize the individual voltages to their lowest one. Balance operation automatically starts about 5 seconds after the battery pack is connected. When the voltage difference between cells over 0.02V, the balancer will start to work. The corresponding 'V' will be blinking when it is balancing. When the voltage difference between cells reaches 0.01V or less, balance operation ends and the device enters the sleep mode and 'SLP' will be displayed on the LCD. How to use? Simply connect the battery pack to 7 pins connector (XH type). Please note the negative lead or pin of the LiPo connector should match the 'Negative' marked on the shell of LiPoPal. After the LiPo is connected, the LCD display the voltage of each cell and the built in balance will check the voltage. If the pack is not balanced, the balancer will start working

Toys/Games/Electronic

SKYRC LiPoPal Self Voltage Balancer 2-6S LiPo For Battery Voltage Checker

CellMeter 7 V2 With Balance Function Digital Battery Capacity Checker Voltage Meter

CellMeter 7 V2 With Balance Function Digital Battery Capacity Checker Voltage Meter

CellMeter 7 V2 With Balance Function Digital Battery Capacity Checker Voltage Meter Cellmeter-7 v2 is a simple, fast and brilliant way to check battery voltage, and most importantly, help you determine the condition of your packs within seconds. This Cellmeter comes with balance function, it take the battery voltage in the lowest section as the benchmark to discharge for balance. Description: Item number: CellMeter 7 V2 Item name: Digital Battery Capacity Checker Voltage Meter Cell number: NiCd/NIMH (4-7 Cells) Lithium type (2-7 Cells) Battery Type: NiCd/NIMH, Li-Po, LiFe, Li-Ion Color: Black Shell material: durable hard plastic Item size: 84*50*15mm Package weight: 63g Instructions for use: 1. Press TYPE key to select LIPO (lithium polymer battery) LIFE (lithium ion battery) LI-ION (Lithium Ion Battery) three kinds of lithium batteries 2. Press the button to turn the display every piece CELL battery voltage and remaining battery 3. Press the MODE button displays battery voltage, single voltage, and single highest voltage, and low voltage chip, chip voltage difference between the highest and lowest Shows the total number of pieces 4S-7S nickel-metal hydride and nickel-cadmium batteries and the total voltage. Package Included: 1 x Digital battery capacity checker 1 x Manual

Toys/Games/Electronic

CellMeter 7 V2 With Balance Function Digital Battery Capacity Checker Voltage Meter

1S LiPo Battery Voltage Checker Tester For Quadcopter Battery w/ JST MCX PH 2.0 and Micro Losi Cable

1S LiPo Battery Voltage Checker Tester For Quadcopter Battery w/ JST MCX PH 2.0 and Micro Losi Cable

1S LiPo Battery Voltage Checker Tester For Quadcopter Battery w/ JST MCX PH 2.0 and Micro Losi Cable Description: Item Name: 1S LiPo Battery Voltage Checker Tester Connector: Micro JST 1.25, PH 2.0 Micro Losi and JST Voltage: Works with regular and HV battery packs Detection Accuracy of Voltage: 3.65V0.01V ,4.20V0.01V, 4.35V0.01V Battery Voltage Input Range: 2.50~4.35V @1Cell LiFe,LiPo,Li-Hv Working Temperature: -20~75 Storage Temperature: -25~85 Dimensions: 73x25x15mm Weight: 10g Note: Four batteries can be tested simultaneously Features: - Support four standard micro UAV battery interface, plug and check. - 0.36 inches red digital tube display, display battery voltage, battery voltage detection accuracy is accurate to 10mV. - Supporting ports JST(2.54mm) MOLEX(2.0mm) mCPX(1.25mm) MCX(1.25mm). - Support lithium battery LiFe(3.3/3.65V) LiPo (3.7/4.20V),Li-Hv(3.8/4.35V). - Four battery interfaces support battery polarity reverse connection protection, four battery interfaces are supported LiFe,LiPo,LiHv. - The 4 battery interfaces display the voltage independently, from CH1 to CH4. Package Included: 1x 1S LiPo Battery Voltage Checker Tester

Toys/Games/Electronic

1S LiPo Battery Voltage Checker Tester For Quadcopter Battery w/ JST MCX PH 2.0 and Micro Losi Cable

12V Electronic Automotive Car Auto Battery checker Relay Tester

12V Electronic Automotive Car Auto Battery checker Relay Tester

Description: AE100 is a quick go tester for relays that provides you with an indication of the general health and functioning of the most common Automotive relays. Tester will check for proper functioning of the relay contacts by connecting the car battery (11V--15V) to the relay coil. Tester will watch the pin configuration, the time to contacts closure and opening, consistency of the relay during each test session. Tester will light the GREEN LED if all passed during the test session, if not light the RED LED. Operating Instructions: 1. Connect the power leads to the car battery -- black alligator clip to negative terminal, red alligator clip to positive terminal. 2. Tester is powered up when the LED illuminates in RED. Check the relay before plugging into the tester. If it's a 4 pin relay, select '4 pin' on the tester. If it's a 5 pin relay, select '5 pin' on the tester. 3. Plug in the relay into one of the three receptacles. Press the 'Test' button. 4. Tester will check the pin configuration of the unknown relay. Tester will light the RED LED if the unknown relay is not the same to the most of common automotive relays or the pin of the unknown relay is destroyed. 5. Tester will open and close the relay 10 times for testing the time to contacts closure and opening if the pin configuration of the relay is right. Tester will light the RED LED immediately if the time is overtime. 6. Tester will check the consistency of the relay after testing the time to contacts closure and opening ten times. Tester will light the GREEN LED if the test passed, if not light the RED LED. 7. Disconnect power leads from the car battery and remove relay from the tester. Package Included: 1 X Automotive Relay Tester(JH100) 1 X User Manual 1 X Carry Bag

Auto/Boat/Plane/Accessories

12V Electronic Automotive Car Auto Battery checker Relay Tester

9V 12V Battery Sound and Light Alarm Protection Module Against Over-discharge Board

9V 12V Battery Sound and Light Alarm Protection Module Against Over-discharge Board

9V 12V Battery Sound and Light Alarm Protection Module Against Over-discharge Board Scope: Mainly used in battery (9V or 12V) voltage monitoring, simple and practical, support sound and light alarm. Features: When the buzzer low voltage will 'DiDiDi' sounds and the red LED lights up, when the battery voltage rise above to the set value, buzzer will stop alarm. Size: 2.9 x 3 cm The main chip: LM358 9V Battery: When a battery over-discharge (battery voltage drops below about 8V) the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; 12V Battery: When a battery over-discharge (battery voltage less than 10.4V) the red lights and the buzzer calling to achieve sound and light alarm, to achieve control battery discharge status, prevent over-discharge battery, and damage battery; Advantages: With a sound and light alarm, simple and practical. The module input with reverse protection, if reverse polarity power input will not burn. But without overvoltage protection, if the input exceeds 15V, the chip above the module will burn out. Adjustment method: 9V Battery: Input 9V, the LM358 voltage adjustment between 2 feet and 4 feet to about 5.78V, the alarm voltage is 8V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 feet and 4 feet voltage is reduced, the sensitivity increased. 12V Battery: Input 12V, The LM358 voltage adjustment between 2 feet and 4 feet to about 6.05V, the alarm voltage is 10.4V (we has set it before shipment, so you don't need to adjust it again). Clockwise adjustment, 2 and 4 feet voltage is reduced, the sensitivity increased. Package includes: 1 x Battery Over-discharge Protection Module

Electronics/Audio

9V 12V Battery Sound and Light Alarm Protection Module Against Over-discharge Board

3.7V 100A 5S BMS Li-ion LMO Ternary Lithium Battery Protection Module Board With Balance Support Disconnection/Over-Current/Over-Charge/Over-Discharge Protection

3.7V 100A 5S BMS Li-ion LMO Ternary Lithium Battery Protection Module Board With Balance Support Disconnection/Over-Current/Over-Charge/Over-Discharge Protection

Description: 1. Specified chip, stable performance, support disconnection protection, over-current protection, over-discharge protection, over-charge protection, with balance, etc. 2. Common use for 'same port' and 'different port' the protection board uses 15 high-power of ultra-low resistance MOS tube (discharge of 8, charging of 7) in the same port mode can support the discharge current 60A, charging current 60A; different port mode discharge current 80A, charging current 60A. 3. Can use for LMO.Ternary lithium battery.LCO(3.7V)battery packs etc. Parameter: FOR Li-POLYMER LiMnO Protection Parameter(3.6V / 3.7V) Single cell battery overcharge protection voltage: 4.21-4.29 V Single cell battery overcharge protection recover voltage: 4.14-4.24V Over-charge protection delay: 1.5-2.5S Single cell battery over-discharge protection voltage: 2.72-2.88V Single cell battery over-discharge protection recover voltage: 2.9-3.1V Over-charge protection current: 100A Over-discharge protection current: 100A Over-discharge protection delay: 0.5-1.5S Temperature protection: Yes, have temperature control interface. Disconnect protection: Yes Shortage protection: Yes Shortage delay: 100-600 uS Shortage protection recover mode: Off load release. Contact discharge current: 80A Synopline discharge current: 60A Charging current: 60A balance function: Yes Ampere balance (Current): 60MA Current balance accuracy: 4.14-4.24V Package included: 1 x 100A 5S lithium battery protection board

Electronics/Audio

3.7V 100A 5S BMS Li-ion LMO Ternary Lithium Battery Protection Module Board With Balance Support Disconnection/Over-Current/Over-Charge/Over-Discharge Protection

FrSky X7 X12S X9DP Transmitter Anti-sliping Stick Switch Cap Sheath

FrSky X7 X12S X9DP Transmitter Anti-sliping Stick Switch Cap Sheath

Specification: Item Name: Anti-slipping Stick Switch Cap Material: Slicone Rubber Quantity: 8pcs Usage: for ALL Transmitter Package Included: 8x Anti-slipping Stick Switch Caps(4 pcs red, 4 pcs black)

Toys/Games/Electronic

FrSky X7 X12S X9DP Transmitter Anti-sliping Stick Switch Cap Sheath

Classic Vintage Clockwork Wind Up Plastic Candle Ship Reminiscence Children Kids Toys

Classic Vintage Clockwork Wind Up Plastic Candle Ship Reminiscence Children Kids Toys

Specificaton: Material Plastic Size 12cm*5cm*2.5cm Item Plastic toys Control Wind up Color Random color When you play it for the first time,please don't wind up too tight and the best cycle is 3. Features: This ship has bright color and modern vintage-style. Put it in the water and wind it up with it can see the ship swim in the water. All plastic construction, comes to you brand new in box. A perfect collectible decoration for adult. Great toy for children. Description: Shape:Ship Size:12cm*5cm*2.5cm Weight:110g Material:Plastic Package include: 1 Ship toy

Toys/Games/Electronic

Classic Vintage Clockwork Wind Up Plastic Candle Ship Reminiscence Children Kids Toys

Mayatech 1180 11*8 Inch Nylon Folding Propeller Blade for RC Airplane

Mayatech 1180 11*8 Inch Nylon Folding Propeller Blade for RC Airplane

Mayatech 1180 11*8 Inch Nylon Folding Propeller Blade for RC Airplane Descritpion: Brand name: Mayatech Item name: nylon folding propeller Size: 11*8inch Material: Nylon Weight: 16grams Thickness of center: 8mm Centen hole diameter: 3mm Package Included: 1X Mayatech 1180 Nylon Folding Propeller Blade

Toys/Games/Electronic

Mayatech 1180 11*8 Inch Nylon Folding Propeller Blade for RC Airplane

DYS Thor 2408 2200KV 2500KV 3-6S Brushless Motor for RC FPV Racing Drone Multicopter

DYS Thor 2408 2200KV 2500KV 3-6S Brushless Motor for RC FPV Racing Drone Multicopter

DYS Thor 2408 2200KV 2500KV 3-6S Brushless Motor for FPV Multicopter 2200KV motor: 2500KV motor: Specification: Item name: Thor 2408 motor KV: 2200KV/2500KV Pull: 1.35kg / 1.45kg Motor Size: 29.7x18.7mm Battery: 3-6s Weight: 37.45g Configu ration: NP Shaft Diameter: M5 Max Continuous current(A): 38.3 (2200KV) / 6.2(2500KV) Max Continuous Power(W): 612.8W (2200KV) / 739.2W(2500KV) Resistance: 0.04 EZO bearing 0.1mm iron core Package included: 1* DYS Thor 2408 motor

Toys/Games/Electronic

DYS Thor 2408 2200KV 2500KV 3-6S Brushless Motor for RC FPV Racing Drone Multicopter

ZOP Power 7.4V 400mAh 2S 50C Lipo Battery JST Plug For Eachine Aurora 68 Fatbee FB90 Racing Drone

ZOP Power 7.4V 400mAh 2S 50C Lipo Battery JST Plug For Eachine Aurora 68 Fatbee FB90 Racing Drone

Description: Battery parameter:ZOP Power 7.4V 400mAh 2S 50C Capacity:400MAH Size:15.8*20*38MM Continuous Discharge Rate:50C Weight:23g Colors:Standard Colors Note: due to the difference between the measurement, the battery dimension and weight may have little error. Caution: Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water. Package Included: 1 x ZOP Power 7.4V 400mAh 2S 50C Lipo Battery JST Plug

Toys/Games/Electronic

ZOP Power 7.4V 400mAh 2S 50C Lipo Battery JST Plug For Eachine Aurora 68 Fatbee FB90 Racing Drone

Guitar to USB Interface Link Audio Wire 6.5mm Male Stereo Headphone Adapter

Guitar to USB Interface Link Audio Wire 6.5mm Male Stereo Headphone Adapter

Feature: -WAV files with variable speed playback capabilities perfect for AIFF audio files for easy learning and practice. -Usb directly into the computer, easy to connect. -Asio channel allows you to use the effect directly (you can also use guitarrig a class of software). -Let the computer into your guitar effect, a variety of powerful effects can be downloaded free of charge to the Internet (online to find more, such as boss monolithic, etc.). -Provide high resistance input (general professional sound card input can not directly access the guitar). -Comes with headphone output, direct monitor. -You can use guitarrig, or use nuendo to record. -Turn your computer or Mac into a guitar amp and recording device without any other hardware. -Support OS: Windows XP SP2/Vista/7 MacOS 8.5, 8.6, 9.x, OS X -Instructions: 1, install this sound card into the computer USB, the computer detects the hardware 2, into the sound card comes with the CD, find the driver and install 3, the system prompts to restart. Restart the device manager to open, see if there is no installation, there will be more than a USB Audio Device 4, after the installation is complete, in the computer taskbar click on the small speaker icon, right click to adjust the audio properties 5, point audio this, in the playback and recording, select USB Audio and enable 6, the guitar output line into the sound card has a guitar logo hole, another hole connected speakers or headphones 7, open the already installed recording software, start recording 8, stereo headphone output, so that you can play with the computer, the output can also be used for monitoring use, 9, USB interface power supply - no external power supply Specifications: Product name: Guitar USB connector line Color: Black Size: Approx. 9.5x5x2cm/3.74'x1.96'x0.78' Wire material: Copper Interface type: USB Applicable equipment: Guitar Audio quality: 16 bit, 44.1 / 48 kHz MP3 Weight: About 90g Package Include: 1x Guitar USB connector cable 1x 6.5mm revolution 3.5mm female adapter 1x CD 1x User Manual

Toys/Games/Electronic

Guitar to USB Interface Link Audio Wire 6.5mm Male Stereo Headphone Adapter

5X Eachine 3.7V 1S 600mah 50C Lipo Battery For Eachine QX90 QX95 QX80 QX70 FB90 QX100 EX105 EX110

5X Eachine 3.7V 1S 600mah 50C Lipo Battery For Eachine QX90 QX95 QX80 QX70 FB90 QX100 EX105 EX110

5X Eachine 3.7V 1S 600mah 50C Lipo Battery For Eachine QX90 QX95 QX80 QX70 FB90 QX100 EX105 EX110 Description: Brand Name: Eachine Item Name: Lipo Battery Capacity: 3.7V 600mah 50C Size: 43x24x8.3mm Weight: 16g Quantity: 5Pcs Working Time: about 5mins Charging Time: about 40mins Usage: for Eachine QX90 QX95 QX80 QX70 FB90 QX100 EX105 EX110 RC Quadcopter Package Included: 5 x 3.7V 600mah Battery

Toys/Games/Electronic

5X Eachine 3.7V 1S 600mah 50C Lipo Battery For Eachine QX90 QX95 QX80 QX70 FB90 QX100 EX105 EX110

Multifunctional Power Supply Converter Board DC Power Module XT60 to USB Charging Module

Multifunctional Power Supply Converter Board DC Power Module XT60 to USB Charging Module

Description: Item Name: Power Supply Converter Board Max Output Current: 3A Input Voltage: 7-28V Max Output Voltage: 5V 3A, 3.3V 0.5A Package Included: 1x Power Supply Converter Board

Toys/Games/Electronic

Multifunctional Power Supply Converter Board DC Power Module XT60 to USB Charging Module

Waterproof Handbag Case Carrying Bag RC Quadcopter Spare Parts For DJI Spark

Waterproof Handbag Case Carrying Bag RC Quadcopter Spare Parts For DJI Spark

Waterproof Handbag Case Carrying Bag RC Quadcopter Spare Parts For DJI Spark Description: Item name: Waterproof Handbag Color: Black, grey Usage: For DJI Spark RC Quadcopter Features: Durable wear resistant and strong enough. Large capacity, very useful and convenient to use. Unique adjustable shoulder strap design will give your shoulder comfortable touch. Will not shrink or fade after washing, wear-resistant and waterproof. This backpack is good for outdoor and travel use. With strong high density foam to keep your quadcopter secure. Will not crush your RC Quadcopter,protected your drone well. Package Included: 1 x Waterproof Handbag

Toys/Games/Electronic

Waterproof Handbag Case Carrying Bag RC Quadcopter Spare Parts For DJI Spark

2 Pairs Furiousfpv FleekProp 2036-4 4-blade Propeller CW CCW for 1102 1103 1104 Motor RC Drone

2 Pairs Furiousfpv FleekProp 2036-4 4-blade Propeller CW CCW for 1102 1103 1104 Motor RC Drone

2 Pairs Furiousfpv FleekProp 2036-4 2x3.6x4 4-blade Propellers CW CCW Yellow for 1102 1103 1104 Motor Specification: Item name: FleekProp 2036-4 Propeller Material: PC Weight: 1.9g/pcs Quantity: 4pcs(2CW and 2CCW) Color: yellow Size: 2inch For 1104, 1102, 1103 motors with motor shaft of 1.5mm in diameter Package included: 2* CW FleekProp 2036-4 Propeller 2* CCW FleekProp 2036-4 Propeller

Toys/Games/Electronic

2 Pairs Furiousfpv FleekProp 2036-4 4-blade Propeller CW CCW for 1102 1103 1104 Motor RC Drone